Aircooled > Engines > Ignition > Electronic kits > Ignition module - Ignitor I - 12 Volts - vaccum distributor - from 1968-
Ignition module - Ignitor I - 12 Volts - vaccum distributor - from 1968-
- In stock
- Shipped within 48 h
- Supplied individually
Brand : Pertronix
Reference : SP-328-302
The Ignitor I module is installed in place of the point and condenser. After assembly, the advance point must be adjusted with a strobe lamp.
Module for origine Bosch distributor with advance lung for type 1 engines from 1968 on.
Static install with the advance lung disconnected: 10° at idle.
The "Slideperformance" advice: to improve the performance of your Ignitor I kit, use a 3 ohm Pertronix coil reference SP-330-150 under penalty of burning the module.
The advantages :
- ease of assembly
- no more adjustments to make
- improves combustion thanks to a better spark in the spark plugs.
- less pollution
- no more point failures from 5500 rev/mn
- decrease in consumption
- better idle
- facilitated ignition
Be careful when connecting it: during assembly of the module it is imperative to correctly recognize the cables with respect to the coil under penalty of immediate destruction of the electronic module.
Burned module: no warranty Electrical parts do not have a warranty nor are they changed.
For static adjustment: it is imperative to use a specific LED, do not forget to add it to your order reference: SP-20026.
Maximum quality module.
MADE IN USA
-
Applications :
- Beetle
- Split bus
- Bay window
- Karmann Ghia
- Type 3
- 912 - 1965 to 1976
- 914 - 1969 to 1976